The method of fixing the mirror on the bathroom wall

Bathroom mirror installation height standard
The lower edge of the bathroom mirror should be at least 135 cm from the ground. If there is a large height gap between family members, you can adjust it up and down. Try to put your face in the middle of the mirror, so that the imaging effect is better. In general, it is better to keep the center of the mirror at 160-165 cm from the ground.
the

The method of fixing the mirror on the bathroom wall
1. First use transparent tape on the back of the waterproof mirror, and then use glass glue sticks, surrounded by glass and plastic seals, this is to prevent mercury from glass, plastic and waterproof mirrors, and a chemical reaction, and the sealing around the mirror is to seal the reflector The back side is not dirt getting in; Installation: Drill the mirror with a glass drill bit, and drill the mounting wall with a pistol drill, put a plastic expansion tube, with a glass nail decorative cover, surround the seal with glass, plastic.
2. Dip the foam double-sided tape and then apply a neutral sealant around it. It must be neutral, acidic ones will corrode the coating on the back of the glass. If you stick scotch tape on it, the tape will deteriorate.
3. Use expansion bolts. When drilling holes, pay attention to the type of tiles. If it is all-ceramic, use rhinestones and drill bit by bit, otherwise, it will be very easy to crack.
4. Use glass bricks to open holes in the glass and fix them with advertising nails.
5. The decorative mirror frame can also be fixed.
the

M1022-Navarre Partially silver layer removed led lighted mirror

The LED light makeup mirror has a supplementary light effect, which can more clearly see the appearance of the makeup part under natural light, without shadows. Achieve a well-proportioned, delicate effect.