What are the precautions for bathroom mirror installation

After purchasing a high-quality bathroom mirror, don't be careless, because the next process is how to install the bathroom mirror. The quality of bathroom mirror installation will affect the effect of your future use. Comparing bathroom mirrors are made of glass and are fragile. So be careful when installing.
Once the bathroom mirror is installed, please do not move and remove it at will, and do not hit the mirror surface with objects to avoid breaking and hurting people. Therefore, you must make a set plan before the bathroom mirror, so as not to damage the environment of the bathroom space due to subsequent changes.
First, measure the distance between the hooks behind the mirror, and then make a mark on the wall and punch holes in the mark. If it is a tiled wall, you need to drill the tile with a glass drill first, then use an impact drill or electric hammer to drive into 3CM, after drilling the hole, put it into the plastic expansion pipe, and then screw on the 3CM self-tapping screw, leaving 0.5CM outside, Then hang the mirror. When installing, be careful not to damage the wall, especially if you hang mirrors on the tile wall, try to punch holes at the joints of the materials. Drilling is best done with rhinestones.
In the bathroom, you usually stand and look in the mirror. The bottom edge of the bathroom mirror should be at least 135 cm from the ground. If the height difference between family members is relatively large, you can adjust it up and down. Try to make your face in the middle of the mirror, so the imaging effect is better.